部落格與見證
閱讀曾於國際綠色科技基金會及Can Picard農莊貢獻專案之義工、實習生及合作者之第一手故事。
Marvin Rieger
I arrived at the end of September 2022. My main project was the FarmBot which is an automated gardening robot. A lot of work is already done, but the farm as a project is far from being finished.
續讀
Mattia Alzapiedi
I am an Italian mechanical engineer. I carried out a synthetic energy analysis relating to electrical and thermal consumption and renewable energy sources at the property.
續讀
Tom Rozier
French student in energetics and mechanical engineering, June 2022. Creation of a self-powered property where an entire family can live sustainably.
續讀
Alexandre Leclaire & Alexandre Hercouet
Create football goals for a personal football field. The goals had to be movable, and should remain discreet in the natural environment.
續讀
Leticia Mijolaro Sartori
I spent a month on the farm. My tasks included watering plants, building structures, animal management, and event organization.
續讀
Ayur Pulle
My main project was the development of a hydroelectric source of power. I worked on calculations for a Pelton Turbine design with Frederick.
續讀
Katrin Leinweber
A plot of land at the Catalan Mediterranean coast with a half-funnel topology and serpentine dirt road that leads to rainwater run-off and soil erosion risks.
續讀
Gabi Wolfe & Mia Bowles
An eleven-week program exploring how to create more sustainable agriculture and farming practices at Can Picard.
續讀
Naoki Hashimoto
Notable projects included the Pelton Wheel project — designing three different water wheels and building a graphical user interface simulation that can be utilized by engineers worldwide.
續讀
Lauren Daniels
Designed a simulation tool for small farms using water wheel technology. Also explored the Barcelona surroundings during the stay.
續讀
Simon
Software developer from Argentina. Worked on water monitoring software to measure and analyze liters flowing from IGT to the Sistres Club.
續讀
Marina Benson
Spent a month in July 2023 setting up a global information system in Q-GIS and developing an action plan for water conservation.
續讀
Clément Rodes
Worked on the Pelton Wheel project — designing and engineering water wheels for energy generation and demonstration, with GUI development for the simulation.
續讀追蹤吾等組裝、校準及改良教育園藝機器人之歷程。
![FarmBot [Part 1] Assembling a gardening robot to do your work!](/images/Alella-Green-Tech-Farmbot-17.jpg)
We started a project to assemble the FarmBot Genesis XL v1.5. A raised bed built out of stone which is around 16 square meters serves as the foundation.
續讀![FarmBot [Part 2] Calibration. First steps by your garden robot!](/images/Farmbot-Alella-Green-Tech-workshop-2.jpg)
The FarmBot is nearly ready to be powered on. The newest firmware has to be flashed onto the micro SD card before calibration can begin.
續讀![FarmBot [Part 3] Improvements. Can my robot live forever?](/images/Alella-Green-Tech-Farmbot-16.jpg)
After assembling the robot and connecting it to water and power, we look at where it could need extra protection covers and durability enhancements.
續讀
Vanessa Egger's internship at the International Green Tech Foundation — harvesting all the vegetables and removing the plants as part of the seasonal cycle.
續讀
Vanessa Egger, studying environmental education, explores how the FarmBot mounted to a raised garden bed can serve as an educational tool for all kinds of plants.
續讀